Those who know something will know that there is a grinding process in the production process of ferrite magnetic rings. After grinding, the surface is almost the same, but after the magnetic ring is ground, its surface is extremely dirty. You can touch it with your hands. This is the same as digging for coal, because when grinding, the rough spots on the surface are ground out, and there will always be some grinding left on the body, and these grinding will be mixed with the magnetic ring, so it looks like, The surface is relatively dirty, so some measures must be taken to wash off the stains on the surface of the magnetic ring.
So what mechanical equipment should be used to clean the ferrite ring?
For small batches of magnetic rings, you can wash them by hand. Put the magnetic rings in a basin of clean water and rub them with your hands. However, if you want to produce a large batch of hundreds of thousands, you can’t solve it by hand. A lot of labor is wasted. Besides, it is hand-washed and put in the oven to dry. Otherwise, if there is moisture on the surface, oxidation will occur over time.
Ferrite bead
If a large number of magnetic rings are produced, a magnetic ring ultrasonic cleaning machine must be used to clean the magnetic rings. Not only can the magnetic rings be cleaned quickly, but the cleaned magnetic rings have been dried, which greatly improves the efficiency. Generally speaking, use Ultrasonic cleaning, the surface of the magnetic ring is not completely clean once, and it must be cleaned 3 to 4 times to remove the stains on the surface of the magnetic ring. The more times you clean the magnetic ring, the brighter the magnetic ring will be. At least 3 times of ultrasonic waves are required. The clean water in the ultrasonic should be replaced frequently from time to time. Try to use clean water to clean the magnetic ring. Only in this way can the magnetic ring be cleaned and look comfortable!
