How to store NdFeB magnetic materials?
1. Do not approach electronic equipment with neodymium iron boron magnets, because the magnet itself has positive and negative poles and a circuit loop. If it is close, it will affect the electronic equipment and control loop and affect the use.
2. Do not store the magnet in a humid environment to avoid its oxidation, which may cause changes in appearance, physical properties and magnetic properties.
3. If a person who is sensitive to metal objects approaches the magnet, the skin will be rough and red. If the above reaction occurs, please do not touch the magnet.
4. Do not bring magnets close to floppy disks, hard drives, credit cards, tapes, credit cards, TV picture tubes, etc. If the magnet is close to the magnetic recorder and other devices, it will affect or even destroy the recorded data.
Pay attention to the following aspects:
1. Do not place magnets around strong currents;
2. Magnets can not be baked on the fire, after high temperature;
3. The magnet cannot be knocked and vibrated severely;
4. Small magnets cannot be placed together with large magnets;
5. The hoof-shaped magnet should also add a piece of soft iron on the two poles to connect the two poles, and turn the north and south poles of adjacent magnets upside down;
6. Small magnets (such as magnetic needles) cannot be placed together with large magnets.
When storing neodymium iron boron magnets, the requirement for the environment is dryness, and the other is that the neodymium iron boron magnets are not exposed to chemicals such as acids and alkalis, so as to prevent the neodymium iron boron magnets from being affected, corroding, rusting, etc. phenomenon. Therefore, placing the NdFeB magnetic material on a layer of wood has a good effect on avoiding moisture. Always be very careful when storing magnets, as the magnets will stick together by themselves and may pinch your fingers. When the magnets are attracted to each other, the magnet itself may be damaged due to collision (knock off the corners or cracks).
