How to use NdFeB magnet correctly?

How to use NdFeB magnet correctly?
1. Opening mode
In the process of thickness magnetization, it can not be directly stripped, because one of its main characteristics is hard and fragile. When using a relatively brittle magnet, it cannot be peeled directly to avoid undesirable peeling or damage due to excessive force. Once it is broken, it cannot be used again and may cause accidental injury.
2. Push mode
The thick magnetized magnet should be pushed away. If the magnetism is too strong, it is easy to pinch your hand. Push them as much as possible. There is also a push method. When pushing, make sure to push it away with parallel force to avoid crushing or damaging it with force. In general, larger magnets should be handled by the manufacturer whenever possible. Usually, use environmentally friendly paper to separate the magnets. This is to avoid wasting time, energy and hurting people easily in the process of use. Therefore, when using the magnet, please push it away according to the specified method.
3. Placement method
If it is a pair of magnetized NdFeB magnets, they must be placed in pairs with care. Do not demagnetize it. Once the magnetism is lost, it can no longer be used. At this time, it must be replaced.
4. Avoid collision
In the process of use, it should be noted that the materials are easy to become brittle, so be careful in the process of use and avoid collision. Once accidentally dropped on the ground, it is easy to crack, or if blistering, it can no longer be used.
Therefore, when using different magnetization methods and different magnetic intensities, we should pay attention to how to use Nd-Fe-B magnets. Although it is a powerful magnet, it is also very fragile, so you'd better be careful.